You can use most any kind of wood stain to coat concrete as long as you take the proper preparation steps to condition the surface to accept the coating. In addition, you may need to apply a water-proofing agent to the finish coat, depending on where the concrete is located.

Can deck stain be used on concrete?

The Application Process For Deck or Fence Staining Your Concrete. … You can either spray or brush your stain onto the concrete; most people use the sprayer for faster results, but if you would like more precise control then a brush or sponge is an alternative option. You want to give the stain plenty of time to dry.

What kind of stain can you use on concrete?

If you want to stain old concrete, using a true acid stain is always the best option. Avoid “acrylic stains” as these are disguised paint and will also peel with time. Concrete Acid Stains are the only true stains with permanent results.

Does stain work on concrete?

Staining concrete can bring new life to a basement floor or outdoor concrete. Surface preparation is an important part of how to stain concrete. Take time to clean the old concrete before the staining process and work carefully as you apply stain to the concrete floor.

Does stain stay on concrete?

Because stains penetrate into the concrete surface, their color is durable and long-lasting. When applied to properly prepared concrete, the color will not fade, chip, or peel away.

Can Minwax stain be used on concrete?

I found a quart of Minwax Early American wood stain that was almost full. I figured I’d try it out so I started in the back corner using a foam brush – I figured the stain would soak into the raw concrete. And it worked beautifully!

What happens if I use wood stain on concrete?

Never apply stain to a concrete surface until you have cleaned it thoroughly, or the stain will not be able to soak into the surface. … You can use most any kind of wood stain to coat concrete as long as you take the proper preparation steps to condition the surface to accept the coating.

Can you stain outdoor concrete?

Staining concrete is a fast, simple way to turn your dull gray patio into a lively, colorful surface that will make your outdoor space more inviting. The stain is nearly foolproof to apply—just wet the concrete and spray on the stain.

Is it better to stain or paint concrete?

For the ultimate in long-lasting, durable color, choose concrete stain. Because concrete stain doesn’t just sit on the surface of the concrete, but actually penetrates into the pores of the concrete to some degree, your color is not going to peel, chip, or flake.

Does concrete stain need to be sealed?

Do I Have To Seal Concrete We typically recommend sealing and waxing floors on any kind, but it is especially important for interior staining or any exterior areas that are high traffic. … While protecting the floor from damage and making cleaning and maintenance of the floors substantially easier and less expensive.

Article first time published on

How long does concrete stain last outside?

Durability of Stained Concrete Few materials have the longevity of concrete. And because stains permeate the concrete to infuse it with permanent color, a stained concrete floor or pavement should last a lifetime when properly maintained (see How to Protect and Maintain Stained Concrete .

How much will a gallon of concrete stain cover?

More porous concrete will result in a lower coverage rate and thus more stain will be required. On average, acid stains will cover 200 to 400 square feet per gallon, while water based stains will cover slightly more at about 250 to 450 square feet per gallon.

What colors do concrete stain come in?

  • Grey concrete stain.
  • Black concrete stain.
  • White concrete stain.
  • Blue concrete stain.
  • Brown concrete stain.
  • Red concrete stain.
  • Terracotta concrete stain.
  • Charcoal concrete stain.

How do you stain concrete to look like wood?

  1. Start by applying Super-Krete Bond-Kote with a squeegee to achieve a smooth uniform finish.
  2. Next, apply a fiber-infused tape (1/4” or 1/2”) in the desired wood plank pattern.
  3. Apply another coat of Super-Krete Bond-Kote with a squeegee and immediately drag a concrete finishing broom through it.

Can Cabot stain be used on concrete?

Cabot Waterproofing is for application to wood, concrete, brick, masonry and a wide-variety of porous substrates including brick, stone and unglazed tile. It is ideal for new or properly reconditioned decks, fences, siding, shingles, shakes and logs.

Does stained concrete scratch easily?

Staining Concrete is both Residential and Commercial. ust like any other flooring type, stained concrete floors can pick up scratches over time. Shifting furniture, sharp shoe heels, and dragging heavy boxes across the floor can leave scratch marks in the surface layer that stand out in the sunlight.

How do you prepare concrete for staining?

Apply Concrete Cleaner and Degreaser: The vast majority of concrete slabs only require minimum cleaning using an organic degreaser diluted at a medium concentration with water. Scrub Surface: Clean the surface with a soft nylon bristle brush or power wash on a low setting to prepare most floors for staining.

Can you use wood paint on concrete?

As long as you prepare the concrete surface to accept the coating properly, you can use any type of wood stain to coat it. Depending on where the concrete is located, you may also need to apply a water-proofing agent to the finish coat.

Does concrete stain peel?

Although concrete stain is permanent and won’t flake off like paint, it penetrates only the top layer of the concrete surface and will eventually wear away as the surface is worn by traffic or weather exposure.

How do you darken concrete?

If you want to darken the concrete color or give it a glossy appearance, apply a low-solids acrylic sealer as a final coat. The most important step with this project is to seal the concrete once the surface is clean and dry.

Can I use varnish on concrete?

Ultimate Topcoat concrete varnish is also perfect as a concrete floor sealer for new and existing floors. Provides a satin finish when used to seal pattern imprinted concrete.

Can you stain concrete around pool?

Can You Stain Concrete Around a Swimming Pool? Yes, there are several products you can use to stain a concrete pool deck. Our customers preferred product is the Antiquing Concrete Stain. This concrete stain is an easy to to apply, spray-on, quick dry colorant for outdoor concrete.

Can you stain concrete white?

Item Weight2 poundsASINB010O1UK1IItem model number01W

Is stained concrete slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer.

Can you Restain a concrete patio?

The only true type of concrete staining is acid staining, which seeps into the concrete’s pores to actually become a part of the concrete surface. … You can restain concrete if it’s already been stained, but it won’t be as rich of a color, as it may not take in all areas of the concrete.

How long does stain take to dry on concrete?

Let the newly applied stain dry. Dry times will vary based on temperature, humidity and air flow. In optimum conditions, the concrete will be dry to the touch in 15-20 minutes; however, the total cure time is 24 hours.

Is concrete stain waterproof?

LastiSeal Concrete Stain & Sealer is a technological breakthrough – it waterproofs, strengthens, preserves concrete and beautifies the surface in one step! Choose from 38 unique colors to add color and excitement to your dull concrete, mortar, pavers, and concrete blocks.

What is the difference between concrete stain and acid stain?

The main difference between an acid stain and a water based concrete stain is how they interact with the concrete. Acid stains have a muted more natural coloring. They penetrate into the concrete’s pores and interact with it’s natural coloring.

Is concrete staining cheaper than tile?

Staining a concrete floor typically costs less than tiling. Installing ceramic or porcelain tile costs on average between $15 and $20 per square foot.

Can you apply concrete stain with a roller?

Use a roller with extension pole or a sprayer to apply concrete stain over the rest of the surface evenly. Apply first coat evenly, working in one direction. Allow to dry at least 2 hours before applying the second coat.

Can you stain concrete a different color?

Answer: The short answer is, yes. Acid stain will work on any concrete, colored or gray. The big difference will be the final color.