P-Tex is a type of polyethylene, the most widely produced plastic in the world.

What is made of PTEX?

P-tex is the abbreviated name for Polyethylene. There are 10 major classifications of Polyethylene. For snowboards and skis the form used is UHMWPE or Ultra-high-molecular-weight polyethylene. It’s the same material used to make bullet proof jackets as well as hip and knee replacements.

What plastic is PTEX?

SINTERED BASE UHMW PE is Ultra High Molecular Weight plastic. It might also called Ptex by some manufacturers. It is very strong and durable plastic, comparable to Sintered base! Sintered bases come in numbers of IS7200 and up, indicating the density.

Is PTEX a polyethylene?

extruded and sintered. Extruded p-tex is a low molecular weight polyethylene that is manufactured by heating it to 350 degrees F.

What is a PTEX?

Ptex is a texture mapping system developed by Walt Disney Animation Studios for production-quality rendering: … Ptex applies a separate texture to each face of a subdivision or polygon mesh. The Ptex file format can efficiently store hundreds of thousands of texture images in a single file.

How do you scrape PTEX?

  1. Using your propane torch or butane lighter, fire up one tip of the P-Tex candle.
  2. Wait until it’s flaming (this may take a couple of minutes). …
  3. Move the molten P-Tex candle to the gouge. …
  4. Do a second round if necessary then extinguish the flame.
  5. Let the P-Tex cool about 15 minutes.

Is there a difference between clear and black PTEX?

There’s different grades of Ptex but if you’re just using the standard candle either or will use and being that the board is black the clear will only have a minimal discoloration.

Can you PTEX a sintered base?

Sintered is more expensive because it’s more durable, it glides better and it holds wax better. … All p-tex repairs are done with extruded p-tex because it’s not possible to use sintered p-tex unless you own your own snowboard factory with some very expensive tools.

Is PTEX porous?

Often referred to by the trade name p-tex, it’s a strong and impact-resistant substance with a low friction coefficient. Because p-tex is porous, almost like a sponge, it can absorb wax time and time again.

What are snowboard bases made of?

The snowboard base is made of a polyethylene plastic P-Tex. The base materials are usually followed by a number such as sintered 2000. The number is polyethylene’s molecular weight.

Article first time published on

How are sintered bases made?

Rather than melting polyethylene pellets together (extrusion), sintered bases are manufactured by crushing the pellets together under high pressure. This makes a sintered base more porous for maximum wax absorption, and more abrasion-resistant. Base additives can also boost glide.

Is PTEX toxic?

You can also try texturing the inside of the gouge with a file first, this can help the p-tex stick better. Also work somewhere well ventilated because the p-tex smoke is toxic.

How often should you tune your skis?

In general, it’s good to tune your skis after about every 20 days of riding. Again, however, this varies for every user. If you are the type of skier or snowboarder who tends to beat your skis up a lot more than the average rider, you might need a tune-up more often.

Do scratches on snowboard matter?

Scratches on a snowboard can be an issue, especially if they’re deep. If they are not taken care of, your snowboard can lose its flexibility and be harder to maneuver in snow. A good thing is that you can take some measures to repair the board and maintain it, so the risk of scratches is less.

What is a sintered base ski?

Sintered bases are made up of tiny ground up pellets of p-tex that are crushed and put back together under high temperatures. This process creates a much stronger molecular mass and will absorb wax and bond better to new p-tex for stronger repairs.

Are ski bases porous?

A key thing to understand about waxing your skis, is that ski bases are actually filled with millions of microscopic pores which is where the wax gets deposited. The wax doesn’t sit on top of base, it’s meant to seep into the pores of the ski so that the “base structure” can do it’s work of dissipating heat.

What kind of wax do you use on a snowboard?

All-temp or universal wax is designed to work well in any temperature or snow conditions. It may be a good choice if the temperature varies a lot where you ride, if you don’t wax your skis that often, or if you ski in different geographical areas during your season and can’t predict what the weather will be like.

What are Burton boards made of?

Fiberglass makes up two layers of the snowboard with the wood core in the middle. The variations in “the glass” seem infinite when even the direction of the weave affect the ride. Add strands of carbon and things get even more tasty, depending what you like.

Do snowboards have fiberglass?

Fiberglass – Glass is the standard composite fibre material used in snowboard construction. Fiberglass reinforced plastic provides stiffness and strength to the snowboard. It lies right on top of the core. … Metal Edges – Metal runs along the edges of a snowboard allows the board to dig into the snow while turning.

What is the fastest snowboard base?

Fast. The Pathron Carbon Gold is billed as having the fastest snowboard base in production.

Can you wax an extruded base?

Waxing an extruded base won’t make as much difference as waxing a sintered base will. Therefore it is not necessary to wax as often. … So if you want to wax less often and still maintain a reasonable speed of base then extruded is the way to go.

Are black snowboard bases faster?

Black is very quick too. White not so much. If you have sticky bases,that is a big problem. RE: sintered bases & race bases- all race bases are sintered.

Can you fix delaminated skis?

The simplest of ski repairs. Prevent your topsheets from further delaminating by sticking them back down with epoxy. Start by mixing the epoxy; fast- or medium-set will both work. … Let cure overnight, unclamp, peel tape, and cut away excess epoxy with a razor blade.

Is it bad to spray paint a snowboard?

A little paint can change the entire look of a snowboard. While stickers and decals can change the look of a snowboard, nothing alters the appearance of the board better than paint. You can completely customize your snowboard with exterior spray paint.

Can you use sandpaper on a snowboard?

Sanding paper and scotchbrite pads are very helpful for base work, but if you don’t apply even pressure across the full width of the ski base they can do damage. If you don’t have a sanding block for this, just use the wood handle on your wax brush.

Can you vinyl wrap a snowboard?

It’s a Skin vinyl wrap for snowboards up to 65 inches tall and 14 inches wide – Made in the USA using high quality vinyl. Super rich colors provide a great look and added protection against minor scratches.